MightyKool Models use Water only for Cooling without Ice.
The MW1 is the most popular model in dry areas for spot
cooling in sleepers, boats, campers, tents, etc., however the
MW2 is almost a must in a moving vehicle.
For cooling in moving vehicles choose the MW2combo
with the Flex Hose Kit for
15% to 20% more cooling velocity in dry or humid areas. In humid
areas use this combo in sleepers, campers, boats, tents,
etc. Click here for MW2Float
Function and AC/DC Converter
[Contact Us -
Frequently Asked Questions - 12-volt
Testimonials - Prices]
The MightyKool Model MW2 has powerful Double
Ball Bearing Brushless Motors, which produce over 2,300 feet per
minute velocity on high speed. This higher velocity could be important
at times, as medium on the MW2 is like high on the MW1.
This extra Cooling Velocity is especially used
with the the Flex Hose Kit so that
the maximum cool air is available where it is needed most. That
is why the higher velocity of the MW2 has a big advantage.
Just plug in the 10 foot (3 meter) power cord and add water.
The MW2 has all the basic advantages as the MW1
in all other aspects. As either the MW1, WIN or MW2
is the answer if you want the Coolest Air from an Evaporative
Cooling System for your RV, Boat, or even Vehicle in the DRYER
Climates of the World. The Secret to the Cooling System of the
MW2, MW1 & WIN is the single
Custom Cooling Filter Pad! For Humid areas when ventilation is
not possible then consider the "Ice
Water" fully 12-volt air conditioner models.
9 ¼ x 8 x 7 ¼
Centimeters=24.4 x 20.3 x 18.5
MW2 Inches 10 ¼
x 8 x 7 ¼
Centimeters 28.6 x 20.3 x 18.5
12 ½ x 9 ¾ x 10 ½
Centimeters=31.7 x 24.7 x 26.7
The single Custom Cooling Pad is the reason the MW2 Cools!
Therefore it should be changed every two to four hundred hours,
or at least once a season, so that you may continue to enjoy Cooler
Air than any other portable Evaporative Cooler including our own
Swampy Models. We pay shipping and handling if you order
one set of extra Custom Cooler Pad with your model order.
You will appreciate the small versatile size of the MW2
unless you think something must be large to be worth the money!
Our engineers designed this System to produce more cool air than
any other comparable system that is up to five times larger. Engineers
didn't design the Jet Engine to be larger than Piston Engines,
just more powerful.
The Internal water container of the MW2 holds from one
to three hours of cooling, however like the MW1 the MW2
also has an Automatic Filling System through a float. The float
may be hooked to an external water source like our Water Kit if
you do not want to add water every one to three hours. To top
this off you can also operate the MW2 in your home on 110-volts
with the optional AC/DC Converter. You may wish to consider looking
at these inexpensive Options as Shipping & Handling is included
Free with your original order. MW2 Options Using powerful Brushless Double Ball Bearing Motors
this Model merely sips power while streaming cool crisp air where
& when you need it. The MW2 sports a velocity of 2,300
feet per minute with a noise level of 59 dBA on high speed, which
is the noise level of normal speech. If you can visit while riding
in a commercial jet aircraft, you can easily visit while enjoying
the MightyKool's cool air or let it hum you to sleep negating
the outside noises. You can adjust the level of power you prefer
with the three-speed switch.
I received the Swampy MW1 on Wednesday.
Your communication and shipping on my order were accurate and
very prompt. The MW1 arrived well labeled and packed. The MW1
is easy to use. The fan is quiet and really moves a lot of air!
Initial testing at 10% humidity and 81 degree ambient temperature
produced an output vent temperature of 62 degrees. With the fan
set on medium speed this was more than adequate to cool the occupants
of our conversion van. The MW1 is very well constructed. I congratulate
you on an excellent design carried through with quality parts
and an attention to detail. For those who need a compact 12 volt
"swamp cooler" I can recommend the MW1. Thank You, L.J.
Morristown, AZ (They travel extensively & use the MW1 primarily
for camping including sleeping in their Van)
"Dear Swampy, We just wanted to drop you a line to tell you
how well our Mightykool (MW1) worked for us in our trailer on
the Playa at Black Rock City. We run off of solar so this was
a great way to cool off and be able to nap during the 90 degree
days. Thanks," C. and C. Jackson, WY
The MightyKool Models use a Custom Cooling Pad System
which is the Secret to it's Cooling Power, thereby eliminating
the typical pump always necessary in other evaporative coolers.
This saves energy and allows the MW2 to be down sized while producing
even cooler air that has always been associated with our Swampy
Models which use a pump. Perfect Evaporation occurs in the MW2
resulting in cooler temperatures in either dry or humid conditions
as a pump adds either too much or too little water, as there is
no control on what is needed.
The MightyKool MW2 Model on High speed moves about the
same amount of forward airflow as our very popular Swampy
Models S154 or T154 do on Medium Speed at a fraction of the energy
use. Be certain to order a set of Custom Filter Pads with your
order, as they should be changed once or twice during the season
or every 200 to 300 hours of cooling.
"I finally got a chance to use the Swampy MW1 over the TH
of July weekend in 90-95 degree weather. This thing RULES! It
kept my whole camper cool on a medium setting and was turned down
to low at night. I am so impressed with the way it performed,
it was worth every dollar! Thanks again for all your help!"
C. E. Palisade, CO.
I received my Mighty Cool and it's a pretty awesome little contraption.
I have only used it twice now for short periods of time, but so
far am very pleased. I am excited to use it on a weekend camping
trip coming up in my trailer and later on at Burning Man. Thanks!!
A. M. Grand Junction, CO.
Use these in dry climates and you will have cool crisp air streaming
at you for 50 to 80 hours without recharging the typical 105 amp
hour Deep Cycle Battery you choose to purchase (we do not furnish
batteries). This is the only evaporative cooler that has been
used rather successfully in more humid climates by using water
only, if you do not want to deal with our "Ice"
Models. If you wish you may click on Testimonials
regarding the MightyKool in Humid Areas. These Models will also operate efficiently on your
Solar System, with the MW1 using only 11.3 to 21.4 watts on 12.6-volts!
The MightyKool holds enough water to operate for two to four hours
and you can even add a few ice cubes if you so desire. The MW2
comes standard with a float allowing a connection it to an Outside Source of water for unlimited hours
What are the Dimensions, Amperage Draw and Water Capacity?
One gallon (3.75 liters) of water will last around
two to three hours in the daytime and four to five hours during
the night when used for evaporative cooling in dry desert climates.
The "Ice Water" models typically use from 10 pounds
(4.5 kilograms) to 20 pounds (9.0 kilograms) of ice Per Hour,
depending on the ambient temperature and day or night operation.
A 105 Deep Cycle battery, "not being charged", allow
the MW1, WIN3 & MW2 to operate for 50
to 80 hours and the "Ice Water" models like the MK3,
MK4, MAC & M400 will operate for 25 to 35 hours
before the battery needs charging. The S154 Model will
operate about 8 hours before the battery would need charging,
as it uses more energy.
Cooler Models MW1, MW2 & the WIN3 use Water only, however
ice could be added if you wish.
The M400, MK3, MK4, MAC,
& MG4 Provide; Dual Air Conditioning using Ice or Water
All Dual Systems automatically
dispose of the excess condensation collected